August 28, 2021

Switch Qube Installation

How to set up your Switch Qube for the first time.

Wiring Connection

  1. There are three terminals on the Qube Switch:

    • IN: Power In for the device
    • SWITCH: For the Physical Switch of the switch board
    • OUT: For the Appliance Out
  2. This is you current connection inside the switch board.

Existing Wiring Circuit Diagram

  1. Find Line and Neutral wire inside the switch board and connect them as shown below:

New Wiring Circuit Diagram

WiFi Setup

  1. Download and install our Qube WiFi app here.
  2. Open the app, and allow all the requested permissions (if any).
  3. Connect your mobile phone to the same network on which you want your devices to be on. (Note that our devices currently only support 2.4 GHz WiFi network.)
  4. Make sure your mobile’s GPS/location service is switched on.
  5. Open WiFi Settings
  6. You should see your current WiFi network name. Enter your password there.
  7. Set the mode to Broadcast
  8. Check whether the device is in fast blinking mode.
  9. Once you are sure that the device is in fast blinking mode, hit Confirm button on the app to share WiFi credentials.
  10. Make sure you are standing right next to the device you are wishing to connect to.
  11. Once the device is connected to the network. The LED will stop blinking. Your setup is complete. You can close the app now.

Dashboard Setup

Assuming you have already connected your devices to the network. And have also set up your Gateway properly. (If not, goto setup your gateway)

  1. Open your dashboard by going to http://gateway.local
  2. Click on the + button on the bottom right corner of the screen.
  3. Wait for the gateway to locate a new device.
  4. Once your device is located, click on the Save button to add it to the dashboard.
  5. Click Done to go back to the dashboard.

Status LED

  • Blinking Rapidly: Device is ready to accept WiFi configuration
  • Blinking Slowly: Device is trying to connect to WiFi network
  • Continously On: Device is connected to the WiFi

Get your free pilot with  Qube